< Previous | Contents | Manuals Home | Boris FX | Next >
โCoefficient Escalation for Refining Solves
As you begin to solve your anamorphic shot, usually youโll do an initial solve with only simpler distortion features enabled. You might want to consider using โAlways slowโ mode on the Advanced Solver Settings page, especially if you have several nearly-redundant distortion coefficients enabled.
Then, youโll refine the solve by turning on additional terms to reduce the error โ but only keeping terms that make a significant contribution to reducing the error.
Tip: Use โFile/Export/Lens/Solver Distortion as Scriptโ to write out the distortion results from the solver for use in other shots from the same camera setup. Use Script/Run Script to run it later.
Youโll need to decide which distortion features to turn on, and at what time in your process to do so. This is an experiential skill, considering the shots you are handling.
Donโt turn on ROT (rotation) to start; it canโt be determined unless the distortion depends on the alignment, ie there are different distortion parameters in CX** and CY**, parameters other than C*02, C*22, and C*06 are nonzero, or VSCL isnโt 1. HSCL and VSCL should be left for later lens breathing analysis.
You might start with C*02, C*22, and C*04, then maybe add C*24, C*44, and C*06. Consider adding ROT, HCTR, and VCTR. Continue to C*26, C*46, and C*66 only if the situation warrants it (probably worth at least checking anamorphic distance before that0.
Tip: Solve for distortion during slower-moving parts of the shot; keep distortion unchanged during rapid slews. Rolling shutter plus anamorphic distortion equals one big mess. Using key-at-frame mode, donโt put keys in the middle of rapid slews.
With lidar scans, if you have many locked trackers, you can go directly to solving many parameters, including anamorphic distance, and this is likely better
than doing it in stages. You might leave only the asymmetric 6 th-order terms unsolved to start.
ยฉ2025 Boris FX, Inc.ย โย UNOFFICIALย โย Converted from original PDF.